|
Post by caretaker on Jul 25, 2014 20:45:31 GMT
I am thinking of making a bird box and putting it up a tree that is at the end of the garden, a little project for me. What I would like to know is the fixing to the tree, would it be ok to drill a small hole in the top and one at the bottom and nail it to the tree. The tree is a cherry blossom, I think, as it dose have white blossom in the spring. The tree is well over 45 year old.
|
|
|
Post by sweetpea on Jul 25, 2014 22:47:28 GMT
I believe you can downlad plans from the RSPB site. Should be ok to nail or better still, screw omto tree making sure to face north as if facing south the box can get overheated. Good luck.
|
|
|
Post by caretaker on Jul 26, 2014 9:00:33 GMT
Thanks sweetpea, did not know about facing north and I have lots of screws. Will have a look at RSPB sit now.
|
|
|
Post by peony on Jul 26, 2014 10:03:08 GMT
Thanks sweetpea, did not know about facing north and I have lots of screws. Will have a look at RSPB sit now. Also caretaker, make sure you can take it down easily so that you can clean it out each spring
|
|
|
Post by sweetpea on Jul 26, 2014 13:00:08 GMT
Thanks sweetpea, did not know about facing north and I have lots of screws. Will have a look at RSPB sit now. Also caretaker, make sure you can take it down easily so that you can clean it out each spring That was whyI mentioned screws rather than nails.
|
|
|
Post by peony on Jul 26, 2014 13:51:46 GMT
Also caretaker, make sure you can take it down easily so that you can clean it out each spring That was whyI mentioned screws rather than nails. Sorry, thought I was being helpful, obviously not
|
|
|
Post by sweetpea on Jul 26, 2014 14:23:00 GMT
That was whyI mentioned screws rather than nails. Sorry, thought I was being helpful, obviously not I wasn't being critical peony. Sorry if you thought I was
|
|
|
Post by peony on Jul 26, 2014 18:15:21 GMT
Sorry, thought I was being helpful, obviously not I wasn't being critical peony. Sorry if you thought I was No offence taken SP
|
|
|
Post by caretaker on Jul 26, 2014 20:20:56 GMT
I am well over half way to finishing the box, just got to add the last side, good job that clean it out was mentioned as I have screwed and glued but the side panel I will hinge with some kind of lock or peg. I have one more question. Do I put a perch at the front under the entrance hole?
|
|
|
Post by sweetpea on Jul 26, 2014 20:51:55 GMT
I am well over half way to finishing the box, just got to add the last side, good job that clean it out was mentioned as I have screwed and glued but the side panel I will hinge with some kind of lock or peg. I have one more question. Do I put a perch at the front under the entrance hole?Not necessary for bluetits. Not sure about other species.
|
|